Experimental Study of Decomposition Products of C4F7N/CO2 Mixture Under Different Fault Conditions
|更新时间:2025-12-08
|
Experimental Study of Decomposition Products of C4F7N/CO2 Mixture Under Different Fault Conditions
Vol. 47, Issue 12, Pages: 4216-4228(2021)
作者机构:
西安交通大学电力设备电气绝缘国家重点实验室
作者简介:
基金信息:
DOI:
CLC:
Published Online:30 December 2021,
Published:2021
稿件说明:
移动端阅览
YANG Tao, ZHANG Boya, LI Xingwen, et al. Experimental Study of Decomposition Products of C4F7N/CO2 Mixture Under Different Fault Conditions[J]. 2021, 47(12): 4216-4228.
DOI:
YANG Tao, ZHANG Boya, LI Xingwen, et al. Experimental Study of Decomposition Products of C4F7N/CO2 Mixture Under Different Fault Conditions[J]. 2021, 47(12): 4216-4228.DOI:
Experimental Study of Decomposition Products of C4F7N/CO2 Mixture Under Different Fault Conditions
mixed gas has attracted wide attention due to its excellent electrical performance and environmental protection advantages
which has the potential to replace SF6 gas. In this paper
the decomposition experiments of C
4
F
7
N/CO
2
mixture under partial discharge
partial over
heating and spark discharge were carried out according to the fault conditions that may be encountered in actual operation. The decomposition products under different working conditions were qualitatively analyzed by gas chromatography-mass spectrometry(GC-MS)
and the characteristic decomposition products under different working conditions were proposed. The results show that the decomposition products under three different conditions are mainly composed of saturated fluorocarbons(CF
4
C
2
F
6
C
3
F
8
C
4
F10)
unsaturated fluorocarbons(C
2
F
4
C
3
F
6
C
4
F
8
i-C4 F8) and nitrogenous compounds(C
2
F
3
N
C
3
F
5
N
C
2
N
2
HCN). According to the difference of decomposition products under different working conditions
HCN and peak area(C3 F8)/peak area(C2 F3 N)>1 can be used as the characteristic decomposition products under partial discharge condition.C4 F8 and its isomer i-C4 F8 are used as characteristic decomposition products under partial overheating condition. Under the condition of spark discharge
CF4 and peak area(C3 F8)/peak area(C2 F3 N)
<
1 are taken as the characteristic decomposition products of spark discharge. Characteristic decomposition products of power frequency breakdown are C4 F6 and C3 F3 N.